Products

Welding anti-spatter agent
Metal welding anti-spatter agent to address manual methods to clear weld spatter material labor-intensive, low efficacy, easy loss of the surface a series of problems, widely used in the welding industry, welding friend is a good helper.

1 This product is spraying or brushing on the site with the welding slag is easy to splash can form a layer of isolation membrane surface of the welding material and isolated contact of welding slag and welding materials, welding slag falls to isolate the membrane surface can be automatically off, or a touch down.
 (2) to the FDA to eliminating the welding after the shovel, grinding and other processes, reduce labor intensity and improve working conditions, high precision finishes free of welding slag injury to reduce the Weld and weld. The FDA does not affect the subsequent processes such as phosphate, the quality of the coating
3) This product is water-based solution, non-toxic, odorless, free from corrosion, harmful to humans, do not pollute the environment, safety and reliability.
 4 Spraying or brushing may be, does not affect the quality of welding, after welding, easy to clear, simple operation, provincial, and effort.
5: per kilogram of product can be coated with approximately 40 square meters of metal surfaces, use of low-cost.

Scope of application
For arc welding and carbon dioxide gas shielded arc welding. Welding of various types of carbon steel, stainless steel welding slag splash have good results.
Use
The metal on the surface of the weld on both sides of the sprayer spray or brush brush this product, a little dry after welding. Does not destroy the coating layer, can also be later welded.